Steel Push Pier Installation in Union City, TN
- Family-Owned
- 20+ Years Experience
- High Quality
- Honest & Affordable
- Family-Owned
- 20+ Years Experience
- High Quality
- Honest & Affordable
GET IN TOUCH
How Steel Push Pier Installation Works
Steel push pier installation is one of the most trusted methods for stabilizing and restoring the foundations of homes and buildings suffering from settlement or structural sinking. In Union City, TN—where clay-rich soil expands and contracts with moisture changes—homes are often at risk of foundation movement that leads to wall cracks, sinking floors, and unlevel structures.
At Union City Foundation Repair, we use steel push piers to lift and secure foundations back to their original position. These heavy-duty steel supports are hydraulically driven deep into stable, load-bearing strata beneath your home. Once installed, the weight of the structure is transferred onto the piers, bypassing unstable soil layers and providing permanent stabilization.
Our Push Pier Process:
- Excavation – We dig small holes along the perimeter of your foundation to access the footing.
- Bracket Installation – A foundation bracket is installed beneath the footing, ready to support the pier.
- Pier Driving – Steel pier sections are driven vertically into the ground using hydraulic pressure until refusal is met at a stable soil layer.
- Lift and Level – Once all piers are in place, the structure is gently lifted back into position, restoring its original elevation.
- Backfill and Final Inspection – Holes are filled and the site is cleaned. A final elevation reading is taken to confirm stabilization.
Steel push piers are ideal for both residential and commercial properties and can be installed year-round with minimal disruption.
Our Services
- Concrete Slab Foundation Repair
- Pier and Beam or Block and Base Foundation Repair
- Basement Wall Repair
- Elevated Pilings or Stilts Foundation Repair
- Basement Waterproofing
- Cracked Wall / Structural Repair
- House Raising / Lifting
- Polyurethane Foam Injection
- Commercial Foundation Repair
- Steel Push Pier Installation
- Slab Pier Installation
- Helical Pier Installation
- Garage Lintel Repair
- Foundation Wall Repair
- EverBrace™ Wall Restoration System
- CarbonArmor Wall Stabilization
- GeoLock Wall Anchor System
- PowerBrace Foundation Wall Support
- House Leveling
- Pre-Construction Pier Installation
Benefits of Steel Push Pier Installation
Steel push piers are among the most effective foundation repair solutions available. They not only stop foundation settlement—they can reverse it by lifting your structure back to level.
Why Property Owners Choose Push Piers:
- Permanent Foundation Stabilization
Push piers transfer your home’s weight onto stable soil layers, preventing future settling. - Minimal Disturbance
The installation process requires only small excavation zones and does not disturb landscaping or concrete. - Year-Round Installation
Push piers can be installed in almost any weather, including frozen ground. - Lift Capabilities
In many cases, piers can raise sunken portions of a home, closing wall cracks and evening out floors. - Suitable for Heavy Structures
Steel piers are strong enough to support homes with brick exteriors, chimneys, and other heavy loads. - Proven, Engineered Solution
Push piers are a well-tested method accepted by structural engineers across the country.
Whether your foundation is visibly cracking or your floors are sagging, steel push piers offer a reliable and long-lasting fix.
What to Expect During Steel Push Pier Installation
When you partner with Union City Foundation Repair, we ensure the entire push pier installation is safe, clean, and successful—from the first inspection to the final lift.
Our Installation Process:
- Initial Evaluation
We assess your home’s foundation settlement using elevation mapping and crack monitoring. We determine pier placement based on structural load points. - Permit and Prep Work
We obtain any required permits and prep the area, protecting nearby landscaping and removing obstacles. - Excavation and Bracket Setup
Holes are dug at predetermined locations. Custom-engineered brackets are attached under the footing. - Hydraulic Pier Driving
Steel tubes are hydraulically pressed into the ground until they reach bedrock or load-bearing soil. - Structural Lift (if needed)
Once all piers are in place, your foundation is carefully lifted and re-leveled. Cracks may visibly close during the lift. - Backfill and Cleanup
We backfill the holes, compact the soil, and restore disturbed areas. - Post-Repair Elevation Survey
We document final elevations and ensure your foundation is stable and level.
Most push pier projects take 2 to 4 days depending on the number of piers and soil conditions.
Cost of Steel Push Pier Installation in Union City, TN
While steel push piers represent an investment, they are often the most cost-effective solution for serious foundation issues—especially when factoring in long-term peace of mind.
Average Price Range:
- Per Pier (Residential): $1,200 – $2,000
- Total Project (Typical Home): $8,000 – $25,000
- Large Homes / Complex Installations: $30,000+
Key Cost Drivers:
- Number of piers required (based on length and weight distribution)
- Depth to load-bearing soil
- Accessibility (crawl space, basement, slab, exterior)
- Need for structural lifting vs stabilization only
- Soil type and moisture conditions
We provide free inspections and estimates so you’ll know exactly what’s needed and why. Flexible financing options are also available.
Why Choose Us for Steel Push Pier Installation
Union City Foundation Repair has been serving homeowners and commercial property owners across Obion County for over 30 years. Our crews are trained in advanced foundation systems and specialize in deep foundation solutions like push piers.
Why Union City Property Owners Trust Us:
- Licensed, experienced push pier technicians
- Structural assessments using advanced elevation tools
- ⛏️ Minimal disruption installation methods
- 📋 Free inspections with honest recommendations
- Financing plans available
- Backed by transferable warranties
- Proven results on homes, commercial buildings, and historical structures
Our goal is not just to stabilize your foundation—but to provide peace of mind for decades to come.
FAQs About Steel Push Pier Installation
How deep are the steel piers installed?
Push piers are driven into the ground until they reach a load-bearing stratum—typically 10 to 30 feet below the surface, though depths can vary.
Can push piers lift my home back to level?
Yes. In most cases, push piers can lift a sinking foundation back to its original position or very close to it.
Are push piers better than helical piers?
Both are effective. Push piers are ideal for heavier structures and when deeper load-bearing soil is available. Helical piers are more common in lighter or newer builds and soft soils.
Will my cracks disappear after lifting?
Cracks may close during the lift, but cosmetic repairs are usually needed after stabilization.
Looking for Steel Push Pier Installation Near Me?
If you’re searching for Steel Push Pier Installation near me in Union City, TN, look no further than Union City Foundation Repair. Our deep foundation solutions restore strength, levelness, and safety to your home or business. Call us today at 731-792-4200 to schedule a free inspection and see if steel push piers are the right fix for your foundation concerns.