Slab Pier Installation in Union City, TN
- Family-Owned
- 20+ Years Experience
- High Quality
- Honest & Affordable
- Family-Owned
- 20+ Years Experience
- High Quality
- Honest & Affordable
GET IN TOUCH
How Slab Pier Installation Works
Slab pier installation is a structural repair method used to stabilize and lift concrete slab foundations that have settled due to poor soil conditions, erosion, or moisture-related expansion and contraction. In Union City, TN, clay-heavy soils and seasonal moisture swings make slab foundations particularly vulnerable to uneven settlement.
At Union City Foundation Repair, we use slab piers to restore stability to homes and buildings with shifting or sinking concrete slabs. Unlike traditional pier systems installed from the exterior, slab piers are installed directly through the slab, allowing us to address settlement from inside the structure without excavation around the perimeter.
How the Process Works:
- Core Drilling Through the Slab
Holes are drilled in the concrete floor at strategic locations based on elevation readings and load points. - Pier Bracket Placement
A steel bracket is installed beneath the slab, designed to grip and support the concrete. - Pier Driving
Steel piers are hydraulically driven through the bracket and into deep, load-bearing soil. - Lift and Leveling
Once all piers are installed, the slab is carefully raised to its original position. - Grouting and Hole Sealing
The slab holes are filled and patched, restoring the interior surface.
Slab pier systems are ideal for homes with interior cracks, sloping floors, or sunken concrete that cannot be accessed from the outside due to landscaping, driveways, or neighboring structures.
Our Services
- Concrete Slab Foundation Repair
- Pier and Beam or Block and Base Foundation Repair
- Basement Wall Repair
- Elevated Pilings or Stilts Foundation Repair
- Basement Waterproofing
- Cracked Wall / Structural Repair
- House Raising / Lifting
- Polyurethane Foam Injection
- Commercial Foundation Repair
- Steel Push Pier Installation
- Slab Pier Installation
- Helical Pier Installation
- Garage Lintel Repair
- Foundation Wall Repair
- EverBrace™ Wall Restoration System
- CarbonArmor Wall Stabilization
- GeoLock Wall Anchor System
- PowerBrace Foundation Wall Support
- House Leveling
- Pre-Construction Pier Installation
Benefits of Slab Pier Installation
Slab piers offer one of the most targeted and effective solutions for sunken or uneven concrete floors. They are particularly useful for interior-only repairs, where access is limited and perimeter systems aren’t practical.
Advantages of Slab Piers:
- Interior Access Only
No need for exterior excavation, landscaping disruption, or breaking sidewalks/driveways. - Precise Foundation Lifting
Piers can restore the slab to level condition, often closing interior wall cracks and aligning doors/windows. - Long-Term Support
Transfers slab weight to stable soils deep below the surface—often 20 to 30 feet down. - Minimal Damage and Mess
Small core-drilled holes are cleanly patched after installation, leaving little visible evidence. - Fast Installation Time
Most slab pier projects are completed in a few days, with minimal interruption to daily life. - Ideal for Homes with Finished Interiors
Works well beneath tile, hardwood, and carpeted floors with proper care.
With slab pier installation, we can address structural issues from within your home, without tearing up your yard, garage, or exterior surfaces.
What to Expect During Slab Pier Installation
Our slab pier installation process is structured to be as efficient, clean, and stress-free as possible—even when working inside finished homes or commercial buildings.
Our Process:
- Inspection and Elevation Analysis
We take elevation readings throughout the home to identify slab drop zones and determine optimal pier placement. - Interior Preparation
We move furniture, protect flooring, and seal off work areas to minimize dust or debris. - Core Drilling and Bracket Setup
Holes are drilled in the slab, and custom-designed brackets are inserted beneath the concrete. - Steel Pier Driving
Using hydraulic drivers, we advance steel piers deep into load-bearing soil strata below unstable topsoil. - Lifting the Slab
The slab is slowly and evenly raised using synchronized jacks, while we monitor for stress points and cracking. - Grouting and Finishing
Once the slab is level, we fill voids beneath with grout (if needed), seal the drilled holes, and clean up the site. - Post-Repair Inspection
Final elevation measurements and inspections confirm that the slab is stabilized and safe.
Most slab pier jobs are completed in 2–4 days, depending on the size of the home and number of piers installed.
Cost of Slab Pier Installation in Union City, TN
While slab pier systems are more complex than perimeter pier installations, they often cost less than full slab replacement and offer far better long-term results.
Estimated Costs:
- Per Pier Installed: $1,400 – $2,200
- Average Total Project (6–12 piers): $8,000 – $20,000
- Larger Homes/Severe Settlement Cases: $25,000+
What Affects the Price:
- Number of piers needed (based on load and area)
- Interior access and slab thickness
- Need for structural lifting vs stabilization only
- Type of finish flooring to protect and restore
- Soil conditions and pier depth
We provide free inspections and written estimates with no pressure. Flexible financing plans are available to help homeowners spread out the cost over time.
Why Choose Us for Slab Pier Installation
At Union City Foundation Repair, we bring over 30 years of experience to every project, and we’re one of the few companies in the area with specialized equipment and training for interior slab pier installation. We understand the precision, cleanliness, and care needed when working inside finished homes.
Why Local Residents Rely on Our Team:
- Deep knowledge of Union City’s soil movement and slab design
- Advanced interior access tools and hydraulic systems
- Real-time elevation monitoring and lifting calibration
- Minimal disruption to daily living or business operations
- Transparent estimates and honest communication
- 💲 Financing options and long-term warranty coverage
- BBB-accredited and backed by decades of trusted service
We don’t just level floors—we restore confidence in your home’s structural integrity.
FAQs About Slab Pier Installation
How is a slab pier different from a push pier?
Slab piers are installed through the interior of the slab and are specifically designed for single-pour concrete foundations. Push piers are typically used on perimeter footings or exterior foundation walls.
Will I need to leave my home during installation?
No. We take every precaution to keep dust and noise levels controlled, and most homeowners remain in place throughout the project.
Can slab piers lift the foundation back to its original height?
Yes, in most cases. We monitor lifts closely to avoid cracking or over-correcting, but significant leveling is usually possible.
Will I need to redo my flooring?
We take care to drill cleanly and limit cosmetic damage. In finished homes, some flooring may need minor patching or repair. We’ll discuss options before starting.
Looking for Slab Pier Installation Near Me?
If you’re searching for Slab Pier Installation near me in Union City, TN, you’ve come to the right place. Union City Foundation Repair offers advanced, proven slab pier systems that stabilize and lift sunken concrete from the inside out. Whether your floors are sagging or your walls are cracking, we have the tools and experience to fix it right the first time. Call 731-792-4200 today to schedule a free evaluation and secure your home’s foundation.